Sanding

Our sanding solutions turn the roughest surfaces into the smoothest finish! We offer a wide range of abrasive materials combined with machine tools and mobile dust extraction to guarantee you can get the most out of your expertise. This product line also comprises all the accessories you need to complete the perfect job, such as sanding guides, pads of varying densities, protection tape and dust extraction.

Scuff

Non-woven material can be used for both wet and dry hand scuffing as well as with a sanding machine. Type A Very Fine (red) is particularly appropriate for the roughening of unpainted plastics, plywood and aluminium. Type S Ultra Fine (grey) is particularly effective for the roughening between coats when using 2-component paints and primers. Type A Micro Fine (gold) is ideal for attaining the perfect finish. The material is flexible and follows the shape of the working surface.
View category

Scuff Pads 150 x 230 mm

Non-woven material can be used for both wet and dry hand scuffing as well as with a sanding machine. Type A Very Fine (red) is particularly appropriate for the roughening of unpainted plastics, plywood and aluminium. Type S Ultra Fine (grey) is particularly effective for the roughening between coats when using 2-component paints and primers. Type A Micro Fine (gold) is ideal for attaining the perfect finish. The material is flexible and follows the shape of the working surface.
Go to product

Scuff Discs Ø 150 mm

Non-woven material can be used for both wet and dry hand scuffing as well as with a sanding machine. Type A Very Fine (red) is particularly appropriate for the roughening of unpainted plastics, plywood and aluminium. Type S Ultra Fine (grey) is particularly effective for the roughening between coats when using 2-component paints and primers. Type A Micro Fine (gold) is ideal for attaining the perfect finish. The material is flexible and follows the shape of the working surface.
Go to product

Scuff Rolls 115 mm x 10 mm

Non-woven material can be used for both wet and dry hand scuffing as well as with a sanding machine. Type A Very Fine (red) is particularly appropriate for the roughening of unpainted plastics, plywood and aluminium. Type S Ultra Fine (grey) is particularly effective for the roughening between coats when using 2-component paints and primers. Type A Micro Fine (gold) is ideal for attaining the perfect finish. The material is flexible and follows the shape of the working surface.
Go to product

Accessories

Accessories in the paint preparation process.
View category

Control Spray

Sanding guide to be used on putties or primer surfaces before sanding. This spray helps to achieve a perfectly sanded surface without damaging adjacent zones. Can also be used as black matte if applied in several coats (2 - 3).
Go to product

Control Powder

Sanding guide to be used as a sanding control coat on fillers. This product is very economical in use and can be widely applied
Go to product

Surface Protection Tape

For protection during sanding, grinding and light blasting jobs. Perfectly suited for the temporary wedging of glued windscreens.
Go to product

Sanding Discs

An extensive range of various sanding discs for an efficient and high-quality sanding job.
View category

Sanding Discs Premium (8 + 6 + 1 holes) Hook & Loop 150mm

For machine sanding during all stages of the repair process. Open-coated aluminium oxide abrasives especially prepared for strength and durability. Tackup backing (hook & loop) to be used with 150 mm pads.
Go to product

Sanding Discs Premium (6 + 1 holes) Hook & Loop 150mm

For machine sanding during all stages of the repair process. Open-coated aluminium oxide abrasives especially prepared for strength and durability. Tackup backing (hook & loop) to be used with 150 mm pads.
Go to product

Sanding Discs Basic (8 + 6 + 1 holes) Hook & Loop 150mm

For machine sanding during all stages of the repair process. Open-coated aluminium oxide abrasives especially prepared for strength and durability. Tackup backing (hook & loop) to be used with 150 mm pads.
Go to product

Sanding Discs (3 holes) Hook & Loop 76mm

For machine sanding during all stages of the repair process when sanding small areas. Open-coated aluminium oxide abrasive especially prepared for strength and durability. Tackup backing (hook & loop) to be used with 76 mm pads
Go to product

Hand Sanders

An range of various hand sanders for an efficient and high-quality sanding job.
View category

Sanding Cork

Block made of cork for wet or dry sanding. Three layers of natural cork, sealed together. On one side the edges are sharp for precise application and on the other side the edges are shaped for optimal grip.
Go to product

Hand Sanding Board 400mm

Sanding board with a wooden handle, rubber backing and sanding foot made of aluminium and vinyl. Abrasive is secured with a clip.
Go to product

Hand Sanding Board 235mm

Sanding board with a wooden handle, rubber backing and sanding foot made of aluminium and vinyl. Abrasive is secured with a clip.
Go to product

Hand Sanding Board 160mm

Sanding board with a wooden handle, rubber backing and sanding foot made of aluminium and vinyl. Abrasive is secured with a clip.
Go to product

Spot Blaster

Spot Blaster removes rust, old paint layers, dust, etc. from steel.
View category

AirTec Spot Blaster

Pneumatic Spot Blaster. Removes rust, old paint layers, dust, etc. from steel. Suitable for concrete blasting due to enclosed spot nozzle. The unique Venturi system allows the used blasting material to be recycled through the filter bag. Best results when used with Air Tec blasting material 3010. Including one spot nozzle.
Go to product

AirTec Blasting Material

Removes rust, old paint layers, dust, etc. from steel. Suitable for concrete blasting. Special features: chemically neutral, non-magnetic, non-conductive, non-hygroscopic and non-flammable, re-usable. Best results when used with Airtec Spot Blaster 3060
Go to product

Nozzle Set AirTec Spot Blaster

Nozzle set for various applications, for the Air Tec Spot Blaster 3060.
Go to product

Spot Nozzle AirTec Spot Blaster

Suitable for concrete blasting, for the Air Tec Spot Blaster.
Go to product

Sanding Sheets

An range of various sanding sheets for an efficient and high-quality sanding job.
View category

Waterproof Sheets 230 x 280 mm

For wet hand sanding of all paints. Specially prepared latex waterproof paper for surface treatment of small paint defects.
Go to product

Dry Sheets 230 x 280 mm

Abrasive sheets for dry hand sanding during various stages of the repair process. Open-coated aluminium oxide abrasive specially prepared for strength and durability.
Go to product

Mini Sanding Sheet (8 holes) Hook & Loop 81 x 153 mm

Sanding sheets to use for dry sanding with Hamach dust extraction sanding tools.
Go to product

Sanding Sheet (10 holes) Hook & Loop 115 x 230 mm

Sanding sheets to use for dry sanding with Hamach dust extraction sanding tools.
Go to product

Sanding Sheet (14 holes) Hook & Loop 70 x 419 mm

Sanding sheets to use for dry sanding with Hamach dust extraction sanding tools.
Go to product

Miscellaneous

Miscellaneous high quality products for a professional workspot
View category

Soft Flex Rolls 115mm x 25m

Sanding paper on foam backing. Specially for sanding intricate parts. Can be used wet or dry. Roll of 25 m long with perforated pieces 125 x 115 mm in a dispenser box.
Go to product

Foam Sanding Pads

Highly flexible sanding pads for hand sanding. Can be used for wet or dry sanding to sand parts that machines cannot reach. Long-lasting product. Size: 115 x 140 mm.
Go to product

Viscose Sponges

Viscose Sponges for washing or adding water during any sanding process. Dimensions 135 x 90 x 34 mm.
Go to product

Prepping Pasta

Prepping paste is used to simultaneously degrease, clean and sand the surface before painting. Recommended for application with Colad Scuff Pad S Ultra Fine Grey (Art. Nr. 38001500). This water based product is absolutely silicone free and does not harm the environment. 600 ml in a bottle.

Go to product

Rubber Eraser Pad

Specially designed to remove pinstripes, stickers & decals, car lettering, glue residue, attachment tape and foil from paint and chrome surfaces. The pad can withstand up to 4000 RPM and with included adapter it’s suitable for use in any drilling machine. 2 pieces in a box, adapter included.

Go to product

Contact form

Sign up for our newsletter